دانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Design of 100Gbps four-channel WDM communication link with
Dual-Polarization transmission technology and Coherence receiver in the presence of EDFA optical amplifierطراحی لینک ارتباطی WDM چهار کاناله 100 Gbps با فناوری ارسال دوقطبشی و گیرنده همدوس درحضور تقویتکننده نوری17206148FAعلیقربانیمربی، دانشگاه افسری و تربیت پاسداری امام حسین(ع)، تهران، ایرانحمیدرضاخدادادیاستادیار، دانشگاه جامع امام حسین(ع)، تهران، ایرانJournal Article20190912<em>One of the multiplexing methods used in optical telecommunication systems that increases the data transmission rate is Wavelength Division Multiplexing (WDM). In this technology, the information produced by several separate transmitters can be sent simultaneously in the optical fiber and then the information is separated in the receiver. The use of WDM technology and erbium doped fiber amplifier (EDFA) has led to the dramatic growth of optical telecommunication systems, especially direct intensity modulation / detection (IM \ DD) systems. Today, in order to increase the data transfer rate, the use of coherent detection methods is considered.In this paper, the main purpose is to increase the data rate in optical telecommunication systems using WDM technology and increase the communication distance using EDFA. Therefore, we design and simulate an optical telecommunication system that in each WDM channel, the data transmission rate will be equal to 100 Gbps. To achieve the specified data rate, we also use Dual Polarization transmission, linear effect reduction (CD) and nonlinear (SPM) methods, coherent detection systems and signal processing methods. The simulation results in this paper showed that all the effective components considered in the design, achieved the desired quality factor with a communication distance of 80 km. Proper use of EDFA also improves the transmission link length by at least 100%.</em>یکی از روشهای دسترسی چندگانه مورد استفاده در سامانههای مخابرات نوری که باعث افزایش نرخ ارسال داده میشود، همتافت تقسیم طولموج (WDM) است. در این فناوری میتوان اطلاعات تولید شده توسط چندین فرستنده مجزا را بهطور همزمان در فیبر نوری ارسال کرد و سپس به تفکیک اطلاعات، در گیرنده پرداخت. استفاده از فناوری WDM و تقویتکننده نوری آلاییده به اربیوم (EDFA) موجب رشد چشمگیر سامانههای مخابرات نوری، بهخصوص سامانههای مدولهسازی شدت/ آشکارسازی مستقیم (IM\DD) شده است. امروزه بهمنظور افزایش نرخ ارسال داده، استفاده از روشهای آشکارسازی همدوس، مورد توجه است. در این مقاله هدف اصلی، افزایش نرخ داده در سامانههای مخابرات نوری با استفاده از فناوری WDM و بالا بردن مسافت ارتباطی با استفاده از EDFA است. از اینرو به طراحی و شبیهسازی سامانه مخابرات نوری پرداخته میشود که در هر کانال WDM، نرخ ارسال داده برابر با Gbps 100 باشد. برای دستیابی به نرخ داده قید شده، از ارسال به روش دوقطبشی، کاهش اثرات خطی (CD) و غیرخطی (SPM)، سامانههای آشکارسازی همدوس و روشهای پردازش سیگنال، استفاده میشود. نتایج شبیهسازی در این مقاله نشان داد که تمام مؤلفههای درنظرگرفته شده در طراحی، موجب دستیابی به فاکتور کیفیت مورد نظر با مسافت ارتباطی km80 شد. همچنین استفاده صحیح از EDFA، مسافت پیوند انتقال را حداقل 100 درصد بهبود داد.https://elemag.ihu.ac.ir/article_206148_2d008f737bc2fef8f4b631d95b625ea1.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Protection Considerations of High Power Vacuum Tubes
Against Reflected Power Faultملاحظات حفاظت لامپ خلا توان بالا در برابر خطای برگشت توان915206149FAشهریارکابلیدانشیار، دانشگاه صنعتی شریف، تهران، ایرانJournal Article20200328<em>The ceramic fracture in output RF1 window is one of the most important failure factors in high power vacuum tubes. Fast protection systems are used to protect the tube. These protection systems are activated with some measured variables such as the level of backward RF power. On the other hand, a fast protection system can be activated with noise. Therefore, a tradeoff must be done between the response time of the protection system and its sensitivity to the noise. There are many methods to determine the response time of the protection system. The level of allowable power loss in the tube failure process is one of the conventional figures of merit for protection response time determination. However, these methods are conservative and the resulted response time is usually less than the critical time which is necessary for protecting the tube. In this paper, an experimental investigation is presented about the relation between the response time of the tube protection system and the crack growth in the ceramic of RF window. It is shown that the twin growth in ceramic can be a reliable figure of merit for the response time calculation of the tube protection system. </em>لامپهای میکروویو یکی از اجزا مهم فرستندههای مخابراتی محسوب میشوند و در توانهای بالا جایگزینی ندارند. مسئله برگشت توان موج در دهانه موجبر خروجی این لامپها در توانهای بالا مشکلاتی بهوجود میآورد. یکی از این مشکلات آسیب به سرامیک دهانه خروجی لامپ است که وظیفه جداکردن خلا داخل لامپ را از محیط بیرونی برعهده دارد. برای حل این مشکل معمولا سامانههای حفاظتی در منابع تغذیه لامپ وجود دارد که با قطع ولتاژهای تغذیه، لامپ را حفاظت میکند. چالشی که وجود دارد این است که اگر این سامانه حفاظت خیلی سریع باشد به نویز خیلی حساس میشود و باعث اخلال در عملکرد عادی فرستنده خواهد شد. از طرف دیگر اگر سامانه حفاظت کند باشد نمیتواند از لامپ محافظت کند. لذا تعیین دقیق سرعت سامانه حفاظتی بسیار مهم است. در این مقاله موضوع آسیب ناشی از خطای برگشت توان خروجی بر سرامیک دهانه خروجی لامپ مورد بررسی قرار میگیرد. با استفاده از تحلیلهای میکروسکوپی این موضوع نشان داده میشود که قبل از رشد ترک در موجبر خروجی لامپ ساختارهای بلوری دوتایی بهوجود میآیند. دما رخداد این ساختارهای دوتایی بهعنوان معیاری برای فعال شدن سامانه حفاظت لامپ پیشنهاد میشود. نتایج آزمایشگاهی در تایید ایده مقاله ارائه میشود.https://elemag.ihu.ac.ir/article_206149_949253e43b4a65573abf963dc68c3158.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Dynamic Modeling of Unbalanced Magnetic Pull in Eccentric Wound Rotor Induction Machineالگوی پویای کشش نامتعادل مغناطیسی ماشین القایی رتور سیم پیچی شده در شرایط ناهم محوری رتور1725206150FAعباسخلیلیدانشجو دکتری، دانشکده فنی، دانشگاه شهرکرد، شهرکرد، ایرانصمدتقی پور بروجنیدانشیار، گروه برق، دانشگاه شهرکرد، شهرکرد، ایران1111-1111-1111-1111عبدالرضاربیعیدانشیار، دانشکده فنی، دانشگاه شهرکرد، شهرکرد، ایرانJournal Article20200330<em>In this paper, a dynamic model is provided to obtain the waveform of the unbalanced magnetic force in the wound rotor induction machines with static eccentricity. The provided dynamic model is based on the voltage state-space equations of the coupled circuits in the eccentric induction machine. In the model the slotting effect and saturation is neglected and the slot ampere turn is distributed on the slot opening. To avoid computation of the air gap flux density and evade of magnetic pressure integration in each time-step of Runge-Kutta computations and consequently reducing the computation time of dynamic simulations, a static function of the stator and rotor windings’ currents are proposed for computation of the unbalanced magnetic force. The parameter of the proposed function is obtained by analyzing the air gap field density by using winding function theory. Finally, the waveform of the unbalanced magnetic force of the eccentric induction machine is obtained and verified by time-stepping finite elemnt analysis.</em>در این مقاله یک الگوی پویای فضای حالت برای ماشین القایی رتور سیمپیچی ارائه شده است. در الگو ارائه شده اثر هارمونیکهای فضایی چگالی شار فاصله هوایی با لحاظ توزیع غیرسینوسی سیمپیچهای رتور و استاتور لحاظ شده است. همچنین ناهممحوری استاتیکی رتور در مدل پیشنهادی درنظر گرفته شده است. افزون بر متغیرهای جریان سیمپیچها و گشتاور الکترومغناطیسی، مدل پیشنهادی توانایی پیشبینی مولفههای کشش نامتعادل شعاعی را نیز دارد. از آنجایی که هدف مدلسازی استفاده از آن در شبیهسازیهای دینامیکی ماشین میباشد، بهمنظور تسریع در زمان شبیهسازی یک تابع ایستایی برحسب متغیرهای حالت برای کشش نامتعادل مغناطیسی ارائه شده است. مولفههای این تابع استاتیکی همانند اندوکتانسها از تحلیل مغناطیسی ماشین بهدست آمدهاند. اگرچه برای یافتن تابع ارائه شده از تانسور تنش ماکسول استفاده شده است، در بهدست آوردن کشش نامتعادل شعاعی نیاز به محاسبه چگالی شار و انتگرالگیری از فشار مغناطیسی برای یافتن نیرو نمیباشد. در نهایت مدل ارائه شده با روش تحلیلگذرای اجزای محدود تایید شده است.https://elemag.ihu.ac.ir/article_206150_75a06759af3a407d69f6ba3d364c6562.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Analysis and optimization of Triple-speed Coaxial Magnetic Gearsتحلیل و بهینهسازی گیربکسهای مغناطیسی سه سرعتِ هممحور2734206151FAعلیمقیمیدانشجوی دکتری، دانشگاه آزاد اسلامی واحد تهران مرکز، تهران، ایرانمحمودحسینی علی آبادیاستادیار،گروه برق، دانشگاه آزاد واحد تهران مرکز، تهران، ایرانحسنفشکی فراهانیدانشیار، گروه برق، دانشگاه آزاد اسلامی واحد آشتیان، آشتیان، ایرانJournal Article20200412<em>Besides introducing the triple-speed coaxial magnetic gear, the paper studies the influence of the geometric structure on torque and tangential and radial flux density. As rectangular and trapezoidal structures are more welcomed in most projects thanks to their ease of use, the present paper also introduces triple-speed coaxial magnetic gears with rectangular and trapezoidal structures. Then these gears are compared with crescent-shaped magnetic gear using the finite element method. The comparison shows that rectangular magnetic gears are not much different from crescent-shaped gears in terms of the flux density on the edges and corners. However, flux density distribution is more desirable in the former as the air gap between the middle rotor and modulators is variable, and less oscillation is experienced considering tangent and radial flux density distributions. Nonetheless, the trapezoidal structure presents unsatisfactory performance in comparison to the crescent-shaped structure in terms of flux density distribution and torque. An experimental crescent-shaped magnetic gear was built. The obtained results prove the validity of the use of this structure in triple-speed coaxial magnetic gears and the high performance of it compared to other structures used in magnetic gears.</em>در این مقاله ضمن معرفی گیربکس مغناطیسی سه سرعتِ هممحور، تأثیر ساختار هندسی بر روی گشتاور و چگالی شار مماسی و شعاعی بررسیشده است. با توجه به اینکه در بیشتر پروژههای ساخت، میل به ساختارهای مستطیلی و ذوزنقهای شکل بهعلت راحتی کار بالا است، در این مقاله ساختار مستطیلی و ذوزنقهای شکل گیربکسهای مغناطیسی سه سرعتِ معرفی شد و سپس این گیربکسها به روش اجزاء محدود، با گیربکسهای مغناطیسی هلالی شکل مقایسه شدند. در این مقایسه نشان داده شد که گیربکسهای مغناطیسی مستطیلی شکل از نظر چگالی شار لبهها و گوشهها با گیربکسهای مغناطیسی هلالی شکل، تفاوت چندانی ندارند، اما توزیع چگالی شار در ساختار گیربکس مغناطیسی مستطیلی شکل، بهعلت متغیر بودن فاصله هوایی ما بین رتور میانی و مدولاتورها مطلوبتر است و نوسان کمتری در توزیع چگالی شار شعاعی و مماسی دارد اما ساختار ذوزنقهای شکل هم از نظر توزیع چگالی شار و هم از نظر گشتاور نسبت به ساختار هلالی دارای عملکرد نامطلوبی است. در پایان ساختار هلالی شکل ساخته شد و نتایج تجربی نشان داد که این ساختار در گیربکسهای مغناطیسی سه سرعتِ مورد تائید میباشد و دارای عملکرد بهتری نسبت به سایر ساختارها در گیربکس مغناطیسی است.https://elemag.ihu.ac.ir/article_206151_ef0548dd2a4b125118518bfe20f6d672.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Validity of RLC Equivalent Circuit of Grounding Electrodes in Combination with Equivalent Resistivity in Two-layer Soils and Its Application in Transient Analysis of Arrester-Connected Overhead Lines under Lightning Strikeاعتبارسنجی مدار معادل RLC الکترودهای زمین در ترکیب با مقاومت ویژه معادل خاکهای دولایه و کاربرد آن در تحلیل گذرای خطوط هوایی متصل به برقگیر در برخورد صاعقه3542206152FAسجادمحرابیمربی، گروه برق، دانشکده فنی، دانشگاه اراک، اراک، ایرانسعیدرضااستادزادهاستادیار، گروه برق، دانشکده فنی، دانشگاه اراک، اراک، ایرانJournal Article20200419<em>In this paper, approximate and exact equivalent circuits for grounding electrodes buried in horizontally two-layered soils are introduced. In the approximate one, two-layer soil is approximated with equivalent resistivity and then the grounding electrode is modelled with RLC equivalent circuit, while in the exact one, the input impedance of the grounding electrode is first computed in the frequency domain via numerical solution of Maxwell’s equations. Then the input impedance is replaced with rational functions and finally the equivalent circuit in time domain is achieved. In order to extract the validity range of the approximate circuit in two-layer soils, transient analysis of overhead line terminated to arrester in the presence of two-layer soils is carried out where the grounding electrodes are modelled with approximate and exact circuits. The simulation results show that when the thickness of the first layer is less than 1 meter or greater than 40 meter, the approximate circuit yields acceptable results. In addition, sensitivity analysis is carried out on the thickness of the first layer with respect to the single-layer soil. The simulation results show that when the thickness is greater than 40 meter, the two-layer and single-layer soils have the same behavior.</em>در این مقاله مدارهای معادل تقریبی و دقیق برای الکترودهای زمین مدفون در خاکهای دو لایه افقی ارائه میشود. در مدار معادل تقریبی، خاک دو لایه با مقاومت ویژه معادل تقریب زده شده سپس الکترود زمین با مدار معادل RLC جایگزین میشود در حالیکه در روش دقیق، ابتدا امپدانس ورودی الکترود زمین در حوزه فرکانس با حل عددی معادلات ماکسول بهدست میآید سپس با استفاده از روش تطبیق بردار امپدانس ورودی با توابع کسری در حوزه فرکانس جایگزین شده و نهایتا مدار معادل دقیق الکترود در حوزه زمان حاصل میشود. بهمنظور استخراج بازه اعتباری مدار معادل تقریبی در خاکهای دو لایه، تحلیلگذرای خطوط انتقال متصل به برقگیر در مجاورت خاک دو لایه انجام میشود، به گونهای که الکترود زمین با دو الگوی دقیق و تقریبی جایگزین میشود. نتایج شبیهسازی نشان میدهد، هنگامی که ضخامت لایه اول خاک کمتر از m 1 یا بیشتر از m 20 باشد الگوی RLC منجر به نتایج قابل قبولی میشود. ضمنا تحلیل حساسیت روی ضخامت لایه اول خاک دو لایه نسبت به خاک تکلایه انجام میشود. نتایج نشان میدهد هنگامی که ضخامت لایه اول خاک بالاتر از m 40 باشد، رفتار خاک دو لایه همانند تک لایه میباشد.https://elemag.ihu.ac.ir/article_206152_939557ba73bd0e73df981600cf680049.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Design of a New Magnetic Coaxial Gearboxطراحی یک گیربکس مغناطیسی محوری جدید4349206153FAپیماننادریدانشیار، دانشگاه تربیت دبیر شهید رجایی، تهران، ایرانآرمانرمضان نژاددانشجوی دکتری، گروه قدرت، دانشکده مهندسی برق، دانشگاه تربیت دبیر شهید رجایی، تهران، ایرانعلی اکبرمطیع بیرجندیدانشیار، دانشگاه تربیت دبیر شهید رجایی، تهران، ایرانJournal Article20200514<em>This paper presents a new structure in the magnetic gearbox field, which can bring better performances rather than the conventional one. This work aims to describe a developed magnetic gear with a novelty in its physical structure which cause gearbox can experience a new magnetic field distribution. Having experienced a further distribution in its magnets plan, the new model can reveal better performances rather than the original coaxial gearboxes. Although dimensions of the new coaxial gearbox get smaller than the ones in typical design, torque transfer and fluctuating rates have incredibly improved. Simulation results, based on the proposed models, are extracted from a time-stepping finite element analysis. ANSYS Maxwell software uses the Finite Element Method in its calculations and reports the results to validate the magnetic systems operations. </em>در این مقاله ساختاری جدید از گیربکس مغناطیسی ارائه شده است که میتواند عملکرد بهتری را در مقایسه با نمونههای متداول از خود نشان دهد. هدف این کار بررسی یک نوآوری در ساختار فیزیکی گیربکس مغناطیسی میباشد که باعث شده میدان مغناطیسی توزیع مناسبتری در ماشین داشته باشند. تنظیم موقعیت آهنرباها در طرح جدید سبب توزیع بهتر شار مغناطیسی میشود و در نتیجه عملکرد ماشین نسبت به نمونههای مرسوم بهبود مییابد. در ضمن، تغییرات ذکر شده، این امکان را پدید میآورد که میزان چگالی شار در فاصله هوایی افزایش یابد و همچنین سامانه ، پایداری بالاتری داشته باشد. گیربکس مغناطیسی جدید با ابعادی کوچکتر از طرح های پیشین، علاوه بر اینکه مقدار گشتاور انتقالی افزایش یافته است، ماشین نوسان کمتری را تجربه میکند. نتایج شبیهسازیها مبتنی بر روش اجزاء محدود میباشد و با استفاده از نرمافزار تحلیل الکترومغناطیسی Maxwell ANSYS محاسبات و اعتبارسنجی مورد نظر انجام گرفته است.https://elemag.ihu.ac.ir/article_206153_808a768f8f528886b663527305238f9e.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421On the Analysis of Electromagnetic Susceptibility of Superconducting Microstrip Transmission Lines in Oblique Incidenceتحلیل تاثیرپذیری الکترومغناطیسی خطوط ریزنوار ابررسانا در تابش مایل5154206154FAمحمدحسینامینیدانشجوی دکتری، گروه مهندسی برق و الکترونبک، دانشگاه شاهد، تهران، ایرانعلیرضاملاح زادهدانشیار، گروه مهندسی برق و الکترونیک، دانشکده فنی و مهندسی، دانشگاه شاهد، تهران، ایرانJournal Article20200517<em>Superconducting microwave circuits are composed of components made from superconducting microstrip transmission lines (SMTLs). The spatial features of the superconductors provide the system operation at high speed and low noise floor. However, coupling the external electromagnetic field in these systems reduces or nullifies their performance. In this article a general solution for evaluating the electromagnetic behavior of SMTL in different incidence angles is proposed. The analysis is portrayed in the spectral domain. Using the proposed approach, the electromagnetic susceptibility (EMS) of the line is evaluated for oblique incidence. It is investigated for different film thicknesses. The study reveals that the line's susceptibility has the highest value at 80o. But, its value varies for different thicknesses. Different behavior of the induced current for different thicknesses is due to the difference in equivalent impedance. Moreover, due to increase in the equivalent reactance, the line's susceptibility is decreased as the film thickness is decreased. </em>مدارهای مایکروویو ابررسانا از عنصرهایی متشکل از خطوط انتقال ابررسانا ساخته میشوند. هر چند که ابررساناها عملکرد سامانه را در سرعت بالا و کف نویز پایین فراهم میکند، اما تزویج میدان الکترومغناطیسی خارجی به آنها میتواند در عملکرد این سیستمها اختلال بهوجود آورد. در این مطالعه ابتدا در حوزه طیفی یک رهیافت کلی جهت تحلیل رفتار الکترومغناطیسی ساختارهای ابررسانا در زوایای تابش مختلف ارائه میشود. سپس به کمک روش ارائه شده، تاثیرپذیری خطوط ریزنوار ابررسانا در تابش مایل مورد بررسی قرار میگیرد. این بررسی اثر ضخامت فیلم ابررسانا بر تاثیرپذیری خط را شامل میشود. مطابق با نتایج حاصل شده، بیشینه حساسیتپذیری برای تمام ضخامتها با توجه به طول معمول بهکار رفته در مدارات، در تابش با زاویه 80 درجه اتفاق میافتد اما مقدار آن برای ضخامتهای مختلف متفاوت است. رفتار متفاوت جریان القایی در ضخامتهای مختلف بهعلت تفاوت در امپدانس معادل ساختار است. همچنین از آنجا که برای فیلمهای نازک راکتانس معادل بیشتر است، میزان حساسیتپذیری کمتر میگردد. https://elemag.ihu.ac.ir/article_206154_9b3bfcae33158b96f4212ffec247cab6.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Design, Simulation and Fabrication of Ultra-Wide-Band Electromagnetic Waves Absorber with Optimal Dimensions Based on Metamaterialطراحی، شبیهسازی و ساخت جاذب امواج الکترومغناطیسی پهنباند با ابعاد بهینه مبتنی بر فراماده5561206155FAجعفرخلیل پوردانشیار، دانشکده برق، دانشگاه پدافند هوایی خاتم الانبیاء(ص)، تهران، ایرانحمیدرضادلیلی اسکوییدانشیار، دانشگاه شهید ستاری، تهران، ایرانسیدعلیتقویکارشناسی ارشد، دانشکده برق، دانشگاه پدافند هوایی خاتم الانبیاء(ص)، تهران، ایرانJournal Article20200527<em>In this paper, an ultra-wide-band Metamaterial Absorber with simple structure and optimum dimensions and thickness is proposed for X-band applications. This structure design with using three split circular rings and its dimensions optimized with HFSS. The unit cell of the proposed absorber has low dimensions and thickness (thickness 0.066</em><em>λ</em><em>_0 at 10 GHz central frequency). An array of 24 </em><em>×</em><em> 24 elements of the proposed metamaterial absorber with dimensions of </em><em>〖</em><em>170</em><em>×</em><em>170 mm</em><em>〗</em><em>^2 was constructed and evaluated in practice. The structural parameters of resultant Metamaterial including permeability (μ) and permittivity (ε) are extracted by using Nicolson- Rose method. The results of simulation and practical measurement, show that, almost in total X-band rang (of 7.3 GHz to 11.5 GHz), the structure of the absorption bandwidth is 90%. Also, the studing of the results shows that, there is a good agreement between the acting measurement and simulation. The designed structure was also tested for the angles of perpendicular and obliquely incident electromagnetic wave, that, up to 45 degrees, absorption bandwidth did not change much.</em>در این مقاله، یک جاذب فراماده پهنباند با ساختاری ساده، ابعاد و ضخامت بهینه برای کاربردهای باند X پیشنهاد شده است. این ساختار با استفاده از سه حلقه دایروی شکافدار طراحی شده و با نرمافزار HFSS ابعاد آن بهینهسازی شده است. سلول واحد جاذب پیشنهادی دارای ابعاد و ضخامت کم (ضخامت 066/0 در فرکانس مرکزی GHz 10) میباشد. یک آرایه 24×24 عنصری از جاذب فراماده پیشنهادی با ابعاد 170×170 ساخته شده و مورد ارزیابی عملی قرار گرفت. مولفههای ساختاری فراماده حاصل شامل ضریب نفوذ مغناطیسی و ضریب گذردهی الکتریکی آن با روش نیکلسون- رز استخراج شده است. نتایج حاصل از شبیهسازی و اندازهگیری عملی، نشان میدهد که تقریباً در کل محدوده باند x (GHz 3/7 الی GHz 50/11)، ساختار دارای پهنای باند جذب بالای 90 درصد میباشد. همچنین بررسی نتایج حاصله نشان میدهد که تطابق بسیار خوبی بین پاسخ اندازهگیری عملی و شبیهسازی برقرار میباشد. ساختار طراحی شده برای زوایای برخورد عمود و مایل موج الکترومغناطیسی، مورد آزمایش قرار گرفت که تا زاویه تابش 45 درجه، پهنای باند جذب ساختار تغییر محسوسی نمیکند.https://elemag.ihu.ac.ir/article_206155_64582860ea5c3e4d67ce4a0fd9fc49f3.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Design, Simulation and Fabrication of a Wideband Microstrip Antenna Using Multilayered Structure and Parasitic Element in Ku-Bandطراحی، شبیهسازی و ساخت آنتن مایکرواستریپ پهنباند با استفاده از ساختار چندلایه و عنصر پارازیتی در باند Ku6370206156FAرضاکاظمیدانشجوی دکتری ،دانشگاه صنعتی مالک اشتر، تهران، ایرانمحسنفلاحاستادیار، دانشگاه صنعتی مالک اشتر، تهران، ایرانبیژنعباسی آرنداستادیار، دانشگاه تربیت مدرس، تهران، ایرانسید حسینمحسنی ارمکیدانشیار، دانشگاه صنعتی مالک اشتر، تهران، ایرانJournal Article20200606<em>In this paper, a new design of a wide band rectangular microstrip patch antenna in Ku-band using multilayered dielectric structure is presented for broadband RADAR and satellite applications. In this compact design, a conductor pin is used to excite the radiating patch. The parasitic patch is separated from the radiating one by air gap. The obtained 10-dB impedance bandwidth of the antenna is improved to more than 22%. The variations in the measured gain of the proposed antenna are less than 1 dB in the whole bandwidth. The simulation and fabrication results of the proposed antenna are in a good agreement. </em>در این مقاله، طراحی جدیدی از یک آنتن پچ مایکرواستریپی مستطیلی با پهنای باند وسیع در باند Ku با استفاده از ساختار دیالکتریکی چندلایه، برای کاربردهای راداری و ماهوارهای پهنباند ارائه شده است. در این طراحی فشرده، یک گیره رسانای الکتریکی برای تحریک پچ تشعشعکننده مورد استفاده قرار گرفته است. پچ پارازیتی نیز توسط فاصله هوایی از پچ تشعشعکننده جدا شده است. با این روشها، پهنای باند امپدانسی dB 10 اندازهگیری شده آنتن، به بیش از 22% افزایش یافته است. همچنین تغییرات بهره اندازهگیری شده آنتن در کل پهنای باند آن، کمتر از dB 1 است. در ادامه، نتایج شبیهسازی و اندازهگیری آنتن مذکور ارائه خواهد شد و مشاهده میشود که تطابق مناسبی بین شبیهسازی و اندازهگیری وجود دارد.https://elemag.ihu.ac.ir/article_206156_b1bd2f00d4c82d5ee158daff6188eb1d.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Design and Parametric Analysis of the Dual Mode Ferrite Phase Shifter with Linear Polarizationطراحی و تحلیل مولفهای تغییردهنده فاز فریتی دومده با قطبش خطی7177206157FAسید محمد جوادرضویدانشیار، مجتمع دانشگاهی برق و کامپیوتر، دانشگاه صنعتی مالک اشتر، تهران، ایرانعمادحمیدیاستادیار، مجتمع دانشگاهی برق و کامپیوتر، دانشگاه صنعتی مالک اشتر، تهران، ایرانرضاترینیاپژوهشگر، مجتمع دانشگاهی برق و کامپیوتر، دانشگاه صنعتی مالک اشتر، تهران، ایرانJournal Article20200614<em>The design of a dual mode ferrite phase shifter with linear polarization is investigated in this paper. Phase shifters are one of the most commonly used components in phased array radars. The main parts of this phase shifter are ferrite rod, yoke and polarizer. The main specifications of phase shifter are 10.1-10.7 GHz bandwith, less than 1 dB average loss and 360 degree phase shift. Due to the limitations of manufacturing in some parts, a parametric analysis has been performed on some specifications and the allowable amount of changes in these parameters such as yoke and ferrite rod contact length and the air gap between them, the length and radius curvature of polarizer has been reported. </em>در این مقاله طراحی یک تغییردهنده فاز فریتی دومده با قطبش خطی مورد بررسی قرار میگیرد. تغییردهندههای فاز یکی از قطعات پرکاربرد در رادارهای آرایه فازی هستند. قطعات اصلی این تغییردهنده فاز، میله و یوغ فریتی و قطبیکننده است. مشخصات هدف تغییردهنده فاز شامل پهنایباند فرکانسی GHz 7/10-1/10، متوسط تلف کمتر از dB 1 و تغییر فاز 360 درجه میباشد. بهعلت محدودیتهای ساخت در برخی قطعات، یک تحلیل پارامتری روی برخی از مشخصات انجام شده است و میزان مجاز تغییرات این پارامترها نظیر طول تماسی یوغ و میله فریتی و فاصله هوایی بین آنها ، طول و شعاع انحناء قطبی کننده گزارش شده است.https://elemag.ihu.ac.ir/article_206157_411a588373e94eaf27f1f3c97074f8e9.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Analysis of a Coaxial Consequent-Pole Magnetic Gear based on Magnetic equivalent circuitتحلیل چرخدنده مغناطیسی هم محور با ساختار قطب منتجه بر مبنای مدار معادل مغناطیسی7988206158FAعلیرضاخداکرمیمربی، دانشکده فنی و مهندسی، دانشگاه آزاد اسلامی واحد شهرقدس، شهرقدس، ایرانحسنفشکی فراهانیدانشیار، دانشکده فنی و مهندسی ، دانشگاه آزاد اسلامی واحد آشتیان، تهران، ایرانرضانصیری زرندیاستادیار، پژوهشگاه نیرو، تهران، ایرانJournal Article20200626<em>Design and analysis of a magnetic gear (MG) needs to pricise calculation of flux density distribution along the MG. However applying the finite element methode is relatively accurate, it takes a long time in the preliminary design process in order to study the effective parameters. One of the new structures of MGs is consequent-pole mahgnetic gear (CPM) kind that saves the permanent magnet (PM). In this paper, the 2-dimensional (2D) modeling of a CPM using magnetic equivalent circuit (MEC) method is presented which determines the distribution of magnetic fields, fluxes, and torques of inner and outer rotors. To evaluate the performance of the proposed model, a CPM is analysed with two pole PM arc coefiecinet and flux density is extracted in different parts of CMG as well as its radial and tangential component of tourqu. Furthermore, to confirm the proposed model results, the finite element analysis was performed by Ansoft / Maxwell software that verifies the MEC results.</em><strong> </strong>بهمنظور تسهیل در طراحی و تحلیل یک چرخدنده، نیاز به محاسبه دقیق توزیع شار مغناطیسی در قسمتهای مختلف چرخدنده است. اگرچه استفاده از روش تحلیل المان محدود نسبتاً دقیقتر است اما برای مطالعات پارامتری در مراحل اولیه فرآیند طراحی یک محصول، بسیار زمانبر است. لذا در این مواقع اغلب از روش MEC استفاده میشود. یکی از ساختارهای نسبتاً جدید چرخدندهها، نوع قطب منتجه میباشد که در حجم آهنربا صرفهجویی میشود. در این مقاله مدلسازی دو بعدی یک چرخدنده قطب منتجه با استفاده از روش MEC ارائه شده است که توزیع میدانهای مغناطیسی، شارها، گشتاور روتور درونی و بیرونی را در بخشهای مختلف چرخدنده تعیین شده است. برای ارزیابی عملکرد مدل ارائه شده، برای دو نمونه چرخدنده با مقادیر متفاوت ضریب قطب و ضریب حلقه مدولاسیون چرخدنده تحلیل شده و چگالی شار، گشتاور و غیره در بخشهای مختلف چرخدنده تعیین شده است. همچنین برای تایید نتایج بهدست آمده از مدل، تحلیل المان محدود توسط نرم افزار Ansoft/Maxwell انجام گرفته است و نتایج با یکدیگر مقایسه شده اند.https://elemag.ihu.ac.ir/article_206158_fedf144ef6569e3e4fe408a33adad497.pdfدانشگاه جامع امام حسین(ع)الکترومغناطیس کاربردی2645-51539120210421Investigation and Electromagnetic Modeling of Earth Grid Islanding and Its Effect on Touch and Step Voltage Profile Variation Using Finite Element Methodبررسی و شبیهسازی چند پاره شدن شبکه زمین و تأثیر آن بر تغییر ولتاژهای گام و تماس در پستهای فشارقوی با استفاده از روش اجزای محدود8997206159FAاسعدشمشادیاستادیار، دانشکده مهندسی برق، دانشگاه صنعتی اراک،اراک، ایران0000-0002-7271-9933علیرضانصیریدانشجوی کارشناسی، دانشکده مهندسی برق، دانشگاه صنعتی اراک،اراک، ایرانپوریاخرم پوردانشجوی کارشناسی ارشد، دانشکده مهندسی برق، دانشگاه صنعتی اراک،اراک، ایران0000-0002-8718-6519Journal Article20200831<em>The earth grid at high voltage substations should provide safety for people and normal equipment operation, therefore design calculations should be consideredaccurately. Step and touch voltages are among the items that affect people’s safety at high voltage substations. Grounding is suitable so that in addition to having low electrical resistance to the ground, it does not increase the step and touch voltages. Among the factors that laed to an increase in the electrical resistance of the earth’s grid is the tearing of the earth’s grid due to factors such as corrosion of conductors. In this article we provide a description of the appropriate design of high voltage substations grid to simulate the overhead substation grid and its effect on step and touch voltages in ComsulMultiphysics software based on the finit element method. After performing the simulation,it is noticed that the stepand touch voltages in the two-and three-piece earth’s grid are much higher than the healthy earth’s grid and about 48 times comparing with the normal grid.</em>وقوع خطاهایی نظیر اتصال کوتاه و عبور جریانهای خطای نسبتاً بزرگ در شبکههای قدرت، امری اجتنابناپذیر است، لذا طراحی شبکه زمین جهت تخلیه هر چه مناسبتر این جریانها، باید با دقت کامل صورت پذیرد، بهطوریکه علاوه بر تامین مقاومت مناسب باعث افزایش بیرویه ولتاژ گام و تماس نگردد. شبکه زمین در پستهای فشارقوی بایستی ایمنی افراد وتجهیزات را تأمین نماید، لذا محاسبات طراحی و عملکرد صحیح و سالم شبکه باید با دقت مورد توجه قرار گیرد. ولتاژهای گام وتماس در پستهای فشارقوی بهشدت در حفظ ایمنی افراد تأثیرگذار میباشند، یکی از بدترین شرایطی که منجر به افزایش مقاومت الکتریکی کلی شبکه زمین میشود، چندپاره شدن شبکه زمین در اثر عواملی همچون خوردگی هادیها میباشد. در این مقاله ضمن ارائه توضیحاتی پیرامون طراحی مناسب شبکه زمین پست فشارقوی، به شبیهسازی شبکه زمین یک پست فوقتوزیع و اثر چندپاره شدن شبکه زمین در آن بر ولتاژهای گام و تماس در نرمافزار اجزای محدودCOMSOLMultiphysics پرداخته شده است.پس از انجام و بررسی شبیهسازی ملاحظه شد که ولتاژهای گام و تماس در شبکههای زمین دو تکه و سه تکه بسیار بیشتر و پرخطرتر نسبت به شبکه زمین سالم بوده و بهطور خطرناکی تا بیش از48مقدار اولیه برابر میتوانند افزایش یابند.https://elemag.ihu.ac.ir/article_206159_bd2695df8b888558cf67b6cc5bc66e68.pdf