Numerical Evaluation of Electrohydrodynamic Flow and Particle Concentration Effects on the Wire-Plate Electrostatic Precipitator Efficiency

Document Type : Original Article

Authors

1 Researcher, National Defense and Strategic Research University

2 Assistance Professor, National Defense, and Strategic Research University

Abstract

In this paper, a two-dimensional computational model is implemented to study all the necessary phenomena in a simple one-stage plane depositor by considering the interactions between the electrostatic field, the flow field, the charge of the particles and their turbulent motions. In the first step of this paper, while presenting the connections between electrostatic fields, particle dynamics and fluid dynamics, the mathematical model of the corona field, air flow and particle motion is explained. In the following, the electrical conditions (electric field and space charge) and the induced flux pattern are analyzed by the interaction of ion wind and the main gas flux in the studied model. Also, while examining the path of movement and accumulation of particles, their sediment distribution in the channel is investigated and the partial efficiency of particles with different diameters is calculated. In the following, the effect of electrohydrodynamic flux on the efficiency of the equipment is investigated. Finally, considering the normal logarithmic distribution for particles at the input of the sediment channel, the effect of different concentrations of particles at the input on the overall efficiency of the equipment is analyzed. This model is simulated in COMSOL software.

Keywords

Smiley face

References

[1]     K., Parker, “Electrical Operation of Electrostatic Precipitators,” No. 41. IET, 2003
[2]     Y., Guo, et al., “Enhancing PM Removal by Pulse Energized Electrostatic Precipitators—a Comparative Study,” IEEE Transactions on Plasma Science, vol. 47, pp. 365-375, 2018.
[3]     B., Lu, et al., “Comparison of Dust Particle Dynamics Under Different Electrode Shapes at the Early Stage of Negative Corona Discharge,” IEEE Transactions on Plasma Science, vol. 47, pp. 4915-4922, 2019.
[4]     X., Wang, J., Chang, C., Xu, P., Wang, L., Cui, and C., Ma, “Electrical Characteristics of Electrostatic Precipitator with a Wet Membrane-based Collecting Electrode,” Journal of Electrostatics, vol. 80, pp. 85-94, 2016.
[5]     X. Xu, X. Gao, P. Yan, W. Zhu, C. Zheng, Y. Wang, et al., “Particle Migration and Collection in a High-temperature Electrostatic Precipitator,” Separation And Purification Technology, vol. 143, pp. 184-191, 2015.
[6]     X. Xu, C. Zheng, P. Yan, W. Zhu, Y. Wang,  X., Gao, et al., “Effect of Electrode Configuration on Particle Collection in a High-temperature Electrostatic Precipitator,” Separation And Purification Technology, vol. 166, pp. 157-163, 2016.
[7]     C. Zheng, Y. Wang, X. Zhang, Z. Yang, S. Liu,  Y. Guo, et al., “Current Density Distribution and Optimization of the Collection Electrodes of a Honeycomb Wet Electrostatic Precipitator,” RSC Advances, vol. 8, pp. 30701-30711, 2018.
[8]     K. Adamiak, “Numerical Models in Simulating Wire-plate Electrostatic Precipitators: A Review,” Journal Of Electrostatics, vol. 71, pp. 673-680, 2013.
[9]     H. Shen, W. Yu, H. Jia, and Y. Kang, “Electrohydrodynamic Flows in Electrostatic Precipitator of Five Shaped Collecting Electrodes,” Journal of Electrostatics, vol. 95, pp. 61-70, 2018.
[10]   Z. He, and E. Dass, “Correlation of Design Parameters with Performance for Electrostatic Precipitator. Part I. 3D Model Development and Validation,” Applied Mathematical Modelling, vol. 57, pp. 633-655, 2018.
[11]   Z. Long, and Q. Yao, “Evaluation of Various Particle Charging Models for Simulating Particle Dynamics in Electrostatic Precipitators,” Journal of Aerosol Science, vol. 41, pp. 702-718, 2010.
[12]   T. Yamamoto, M. Okuda, and M. Okubo, “Three-dimensional Ionic Wind and Electrohydrodynamics of Tuft/Point Corona Electrostatic Precipitator,” IEEE Transactions Industry Applications, vol. 39, pp. 1602-1607, 2003.
[13]   T. Yamamoto, Y. Morita, H. Fujishima, and M. Okubo, “Three-dimensional EHD Simulation for Point Corona Electrostatic Precipitator Based on Laminar and Turbulent Models,” Journal Electrostatics., vol. 64, pp. 628-633, 2006.
[14]   Zh. Feng, L. Zhengwei, and A. Kazimierz, “Numerical Simulation of Electrohydrodynamic Flow and Vortex Analysis in Electrostatic Precipitators,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25. pp. 404-412, 2018.
[15]    L. Zhao and K. Adamiak, “Numerical Simulation of the Electrohydrodynamic Flow in a Single Wire-plate Electrostatic Precipitator,” IEEE Transactions on Industry Applications, vol. 44, pp. 683-691, 2008.
[16]   U. Kogelschatz, W. Egli, and E. A. Gerteisen, “Advanced Computational Tools for Electrostatic Precipitators,” ABB Review 4, pp. 33-42, 1999.
[17]   A. Soldati, “On the Effects of Electro-hydrodynamic Flows and Turbulence on Aerosol Transport and Collection in Wire-Plate Electrostatic Precipitators,” Journal Aerosol Science., vol. 31, pp. 293-305, 2000.
[18]   H. Fujishima, Y. Ueda, K. Tomimatsu, and T. Yamamoto, “Electrohydrodynamics of Spiked Electrode Electrostatic Precipitators,” Journal Electrostatics, vol. 62, pp. 291-308, 2004.
[19]   J. Podlinski, A. Niewulis, J. Mizeraczyk, and P. Atten, “ESP Performance for Various Dust Densities,” Journal Electrostatics, vol. 66, pp. 246-253, 2008.
[20]   J. Podlinski, A. Niewulis, and J. Mizeraczyk, “Electrohydrodynamic Flow and Particle Collection Efficiency of a Spike-Plate Type Electrostatic Precipitator,” Journal Electrostatics, vol. 67, pp. 99-104, 2009.
[21]   C. J. Chen, Sh. Y. Jaw, “Fundamentals of Turbulence Modeling,” Taylor & Francis, 1998.
[22]   H. Hayashi, Y. Takasaki, K. Kawahara, T. Takenaka, K. Takashima, and A. Mizuno, “Electrostatic Charging and Precipitation of Diesel Soot,” IEEE Transactions on Industry Applications, vol. 47, pp. 331-335, 2011.
[23]   Farnoosh, N., K. Adamiak, and G. S. P. Castle, “Three-Dimensional Analysis of Electrohydrodynamic Flow in a Spiked Electrode-Plate Electrostatic Precipitator,” Journal of Electrostatics, vol. 69, pp. 419-428, 2011.
[24]   N. Morasaei, M. Tabrizian, and M. Ansarian, “Modeling and Estimation of Corona Losses in Bipolar HVDC Transmission Line Using Finite Element Methods (FEM),” Scientific Journal of Applied Electromagnetics, vol. 4, pp. 37-47, 2018 (In Persian).
[25]  K. Adamiak and P. Atten, “Numerical Simulation of the 2-D Gas Flow Modified by the Action of Charged Fine Particles in a Single-Wire ESP,” IEEE Transactions. on Dielectrics and Electrical Insulation, vol. 16, pp. 608-614, 2009.

Files

History

  • Receive Date: 25 March 2021
  • Revise Date: 30 June 2021
  • Accept Date: 06 July 2022
  • Publish Date: 23 October 2022

Share

How to cite

Statistics