[1] K., Parker, “Electrical Operation of Electrostatic Precipitators,” No. 41. IET, 2003
[2] Y., Guo, et al., “Enhancing PM Removal by Pulse Energized Electrostatic Precipitators—a Comparative Study,” IEEE Transactions on Plasma Science, vol. 47, pp. 365-375, 2018.
[3] B., Lu, et al., “Comparison of Dust Particle Dynamics Under Different Electrode Shapes at the Early Stage of Negative Corona Discharge,” IEEE Transactions on Plasma Science, vol. 47, pp. 4915-4922, 2019.
[4] X., Wang, J., Chang, C., Xu, P., Wang, L., Cui, and C., Ma, “Electrical Characteristics of Electrostatic Precipitator with a Wet Membrane-based Collecting Electrode,” Journal of Electrostatics, vol. 80, pp. 85-94, 2016.
[5] X. Xu, X. Gao, P. Yan, W. Zhu, C. Zheng, Y. Wang, et al., “Particle Migration and Collection in a High-temperature Electrostatic Precipitator,” Separation And Purification Technology, vol. 143, pp. 184-191, 2015.
[6] X. Xu, C. Zheng, P. Yan, W. Zhu, Y. Wang, X., Gao, et al., “Effect of Electrode Configuration on Particle Collection in a High-temperature Electrostatic Precipitator,” Separation And Purification Technology, vol. 166, pp. 157-163, 2016.
[7] C. Zheng, Y. Wang, X. Zhang, Z. Yang, S. Liu, Y. Guo, et al., “Current Density Distribution and Optimization of the Collection Electrodes of a Honeycomb Wet Electrostatic Precipitator,” RSC Advances, vol. 8, pp. 30701-30711, 2018.
[8] K. Adamiak, “Numerical Models in Simulating Wire-plate Electrostatic Precipitators: A Review,” Journal Of Electrostatics, vol. 71, pp. 673-680, 2013.
[9] H. Shen, W. Yu, H. Jia, and Y. Kang, “Electrohydrodynamic Flows in Electrostatic Precipitator of Five Shaped Collecting Electrodes,” Journal of Electrostatics, vol. 95, pp. 61-70, 2018.
[10] Z. He, and E. Dass, “Correlation of Design Parameters with Performance for Electrostatic Precipitator. Part I. 3D Model Development and Validation,” Applied Mathematical Modelling, vol. 57, pp. 633-655, 2018.
[11] Z. Long, and Q. Yao, “Evaluation of Various Particle Charging Models for Simulating Particle Dynamics in Electrostatic Precipitators,” Journal of Aerosol Science, vol. 41, pp. 702-718, 2010.
[12] T. Yamamoto, M. Okuda, and M. Okubo, “Three-dimensional Ionic Wind and Electrohydrodynamics of Tuft/Point Corona Electrostatic Precipitator,” IEEE Transactions Industry Applications, vol. 39, pp. 1602-1607, 2003.
[13] T. Yamamoto, Y. Morita, H. Fujishima, and M. Okubo, “Three-dimensional EHD Simulation for Point Corona Electrostatic Precipitator Based on Laminar and Turbulent Models,” Journal Electrostatics., vol. 64, pp. 628-633, 2006.
[14] Zh. Feng, L. Zhengwei, and A. Kazimierz, “Numerical Simulation of Electrohydrodynamic Flow and Vortex Analysis in Electrostatic Precipitators,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 25. pp. 404-412, 2018.
[15] L. Zhao and K. Adamiak, “Numerical Simulation of the Electrohydrodynamic Flow in a Single Wire-plate Electrostatic Precipitator,” IEEE Transactions on Industry Applications, vol. 44, pp. 683-691, 2008.
[16] U. Kogelschatz, W. Egli, and E. A. Gerteisen, “Advanced Computational Tools for Electrostatic Precipitators,” ABB Review 4, pp. 33-42, 1999.
[17] A. Soldati, “On the Effects of Electro-hydrodynamic Flows and Turbulence on Aerosol Transport and Collection in Wire-Plate Electrostatic Precipitators,” Journal Aerosol Science., vol. 31, pp. 293-305, 2000.
[18] H. Fujishima, Y. Ueda, K. Tomimatsu, and T. Yamamoto, “Electrohydrodynamics of Spiked Electrode Electrostatic Precipitators,” Journal Electrostatics, vol. 62, pp. 291-308, 2004.
[19] J. Podlinski, A. Niewulis, J. Mizeraczyk, and P. Atten, “ESP Performance for Various Dust Densities,” Journal Electrostatics, vol. 66, pp. 246-253, 2008.
[20] J. Podlinski, A. Niewulis, and J. Mizeraczyk, “Electrohydrodynamic Flow and Particle Collection Efficiency of a Spike-Plate Type Electrostatic Precipitator,” Journal Electrostatics, vol. 67, pp. 99-104, 2009.
[21] C. J. Chen, Sh. Y. Jaw, “Fundamentals of Turbulence Modeling,” Taylor & Francis, 1998.
[22] H. Hayashi, Y. Takasaki, K. Kawahara, T. Takenaka, K. Takashima, and A. Mizuno, “Electrostatic Charging and Precipitation of Diesel Soot,” IEEE Transactions on Industry Applications, vol. 47, pp. 331-335, 2011.
[23] Farnoosh, N., K. Adamiak, and G. S. P. Castle, “Three-Dimensional Analysis of Electrohydrodynamic Flow in a Spiked Electrode-Plate Electrostatic Precipitator,” Journal of Electrostatics, vol. 69, pp. 419-428, 2011.
[24] N. Morasaei, M. Tabrizian, and M. Ansarian, “Modeling and Estimation of Corona Losses in Bipolar HVDC Transmission Line Using Finite Element Methods (FEM),” Scientific Journal of Applied Electromagnetics, vol. 4, pp. 37-47, 2018 (In Persian).
[25] K. Adamiak and P. Atten, “Numerical Simulation of the 2-D Gas Flow Modified by the Action of Charged Fine Particles in a Single-Wire ESP,” IEEE Transactions. on Dielectrics and Electrical Insulation, vol. 16, pp. 608-614, 2009.
)
