طراحی و تحلیل الکترومغناطیسی سیستم کویلگان القایی سه طبقه به روش اجزاء محدود

بهاروند, مهدی; دهستانی کلاگر, آرش; علیزاده پهلوانی, محمدرضا

طراحی و تحلیل الکترومغناطیسی سیستم کویلگان القایی سه طبقه به روش اجزاء محدود

نوع مقاله : مقاله پژوهشی

نویسندگان

دانشگاه صنعتی مالک اشتر، مجتمع دانشگاهی برق و کامپیوتر

چکیده

این مقاله به طراحی و تحلیل الکترومغناطیسی سیستم کویل‌گان القایی سه‌طبقه می‌پردازد. در ابتدا، تئوری عملکرد سیستم کویل‌گان چند طبقه به‌اختصار معرفی شده و سپس یک شبیه‌سازی گذرا از حرکت پرتابه، جهت تحلیل و محاسبه ولتاژ، جریان، نیرو، سرعت و شتاب سیستم کویل‌گان با استفاده از نرم‌افزار تحلیل اجزا محدودANSYS Maxwell انجام می‌گیرد. جهت اعتبارسنجی پرتاب‌گر الکترومغناطیسی طراحی شده، با استفاده از معادلات حالت آن، سیستم را در نرم‌افزار MATLAB شبیه‌سازی کرده و نتایج حاصل از تحلیل الکترومغناطیسی با نتایج به‌دست آمده از روابط تحلیلی، مقایسه شده است. سیستم طراحی شده دارای بازده حدود 31 درصد است که قادر است یک جسم کیلوگرمی را با سرعت دهانه خروجی m/s 109 پرتاب نماید. ویژگی‌های طراحی و نتایج تجزیه و تحلیل مربوط به کویل‌گان می‌تواند به‌طور موثر برای توسعه یک سیستم کویل‌گان با مقیاس بزرگ به‌کار گرفته شود.

کلیدواژه‌ها

عنوان مقاله [English]

Design and Electromagnetic Analysis of Three Stage Induction Coilgun System Utilizing Finite Element Method

نویسندگان [English]

Mehdi Baharvand
Arash Dehestani Kolagar
Mohammad Reza Alizadeh Pahlavani

Faculty of Electrical & Computer Engineering, Malek Ashtar University of Technology, Iran

چکیده [English]

This paper deals with the electromagnetic design and analysis of three-stage induction coilgun system. First, the operating principles of multistage coilgun system are briefly introduced and in the following, in order to analyze and calculate the voltage, current, force, speed and acceleration, a transient finite-element simulation of projectile motion is performed utilizing the ANSYS Maxwell software. Furthermore, to validate the design accuracy of the electromagnetic launcher, using its state space equations, a simulation is performed in MATLAB software and the analytical results are compared with the results obtained from electromagnetic analysis. The designed system has an efficiency of about 31% and it is capable of launching a projectile of 21.6 kg at an output speed of 109 m/s. The design features and the results of the analysis can be effectively utilized to develop a large-scale multistage induction-type coilgun system.

کلیدواژه‌ها [English]

Induction Coilgun
Electromagnetic Analysis
Multisatge Coilgun
Pulse Power Module

مراجع

[1] O. Gurhan, "A methodology to measure the metal recovered armature", Naval postgrade schoole, Monterey, California, December 2001.
[2] L. Gherman, M. Pearsica, C. Strimbu, and C.-G. Constantinescu, “Induction coilgun based on ‘E- shaped’ design,” IEEE Trans. Plasma Sci., vol. 39, no. 2, pp. 725–729, Feb 2011.
[3] K. A. Polzin, J. E. Adwar, and A. K. Hallock, “Optimization of electrodynamic energy transfer in coilguns with multiple, uncoupled stages,” IEEE
Trans. Magn., vol. 49, no. 4, pp. 1453–1460, Apr 2013.
[4] H. D. Fair, “Advances in electromagnetic launch science and technology and its applications,” IEEE Trans. Magn., vol. 45, no. 1, pp. 225–230, Jan 2009.
[5] B. D. Skurdal and R. L. Gaigler, “Multimission electromagnetic launcher,” IEEE Trans. Magn., vol. 45, no. 1, pp. 458–461, Jan 2009.
[6] Xiaobo Niu, Kaipei Liu, Yadong Zhang, Zhenren Xiao, Gang Xiao, Yujia Gong, “Research on selfconsistent control strategy of multistage synchronous induction coil launcher”, Energy, vol. 144, pp. 1-9, 2018.
[7] B. Zou, R. Li, M. Wang, D. Yang, and X. Chen, "Research on the Scaling Model of Electromagnetic Coil Launcher," Plasma Science, IEEE Transactions on, vol. 41, pp. 1094-1099, 2013.
[8] R. Haghmaram and M. Ghaseminejad, "The Optimized Design of Multistage Induction Coilgun with a Novel Asymmetric Structure", Applied Electromagnetics, vol. 3, no. 4, pp. 1-8, 2016.
[9] D. C. Lamppa, C. J. Garasi, A. C. Robinson, T. V. Russo, D. N. Shirley, and M. S. Aubuchon, USA Patent, Sandia National Labs, USA (2008).
[10] Shoubao Liu, Jiangjun Ruan, Daochun Huang and Zilin Wan, "Analysis of inductive coil gun performance based on field coupling circuit method," 2009 IEEE 6th International Power Electronics and Motion Control Conference, Wuhan, 2009, pp. 845-849.
[11] H. D. Fair, “Advances in electromagnetic launch science and technology and its applications,” IEEE Trans. Magn., vol. 45, no. 1, pp. 225–230, Jan. 2009.
[12] T. Zhang et al., “Design and testing of 15-stage synchronous induction coilgun,” IEEE Trans. Plasma Sci., vol. 41, no. 5, pp. 1089–1093, May 2013.
[13] T. Zhang et al., “Experimental results from a 4-stage synchronous induction coilgun,” IEEE Trans. Plasma Sci., vol. 41, no. 5, pp. 1084–1088, May 2013.
[14] B. D. Skurdal and R. L. Gaigler, “Multimission electromagnetic launcher,” IEEE Trans. Magn., vol. 45, no. 1, pp. 458–461, Jan. 2009.
[15] Y. S. Jin et al., “Fabrication and testing of a 600-kJ pulsed power system,” IEEE Trans. Plasma Sci., vol. 41, no. 10, pp. 2671–2673, Oct. 2013.
[16] R. J. Kaye, “Operational requirements and issues for coilgun electromagnetic launchers,” IEEE Trans. Magn., vol. 41, no. 1, pp. 194–199, Jan. 2005.
[17] B. E. Fridman, “Transients in pulsed electrical circuits with massive conductors,” IEEE Trans. Plasma Sci., vol. 34, no. 5, pp. 1938–1943, Oct. 2006.
[18] Y. Zhang, J. Ruan, Y. Wang, Z. Du, S. Liu, and Y. Zhang, “Performance improvement of a coil
launcher,” IEEE Trans. Plasma Sci., vol. 39, no. 1, pp. 210–214, Jan. 2011.
[19] J. He, E. Levi, Z. Zabar, and L. Birenbaum, “Concerning the design of capacitively driven induction coil guns,” IEEE Trans. Plasma Sci., vol. 17, no. 3, pp. 429–438, Jun. 1989.
[20] Y. Cao, W. Liu, R. Li, and Y. Zhang, “Study of discharge position in multi-stage synchronous inductive coilgun,” IEEE Trans. Magn., vol. 45, no. 1, pp. 518–521, Jan. 2009.
[21] M. Song, D. Le, B. Go, M. Park and I. Yu, "Design of an Attractive Force Circuit of Pulsed Power System for Multistage Synchronous Induction Coilgun," in IEEE Transactions on Plasma Science, vol. 46, no. 10, pp. 3606-3611, Oct. 2018.
[22] B. Go, D. Le, M. Song, M. Park and I. Yu, "Design and Electromagnetic Analysis of an Induction-Type Coilgun System With a Pulse Power Module," in IEEE Transactions on Plasma Science, vol. 47, no. 1, pp. 971-976, Jan. 2019.
[23] M. Song et al., "Development and Experimental Results of a Three-Stage Induction Coilgun," in IEEE Transactions on Plasma Science, vol. 47, no. 5, pp. 2438-2444, May 2019.
[24] D. Le, B. Go, M. Song, M. Park and I. Yu, "Development of a Capacitor Bank-Based Pulsed Power Supply Module for Electromagnetic Induction Coilguns," in IEEE Transactions on Plasma Science, vol. 47, no. 5, pp. 2458-2463, May 2019.
[25] T. Zhang et al., "Investigation of Magnetic Field Arrangement on Launching Performance of Multistage Synchronous Induction Coilgun," in IEEE Transactions on Plasma Science, vol. 45, no. 7, pp. 1436-1442, July 2017.
[26] Z. Du et al., "Performance Analysis of a Coil Launcher Based on Improved CFM and Nonoverlapping Mortar FEM," in IEEE Transactions
on Plasma Science, vol. 41, no. 5, pp. 1070-1076, May 2013.
[27] X. Tao, S. Wang, Y. Huangfu, S. Wang and Y. Wang, "Geometry and Power Optimization of Coilgun Based on Adaptive Genetic Algorithms," in IEEE Transactions on Plasma Science, vol. 43, no. 5, pp. 1208-1214, May 2015.
[28] X. Niu, K. Liu, Y. Zhang, G. Xiao and Y. Gong, "Multiobjective Optimization of Multistage Synchronous Induction Coilgun Based on NSGA-II," in IEEE Transactions on Plasma Science, vol. 45, no. 7, pp. 1622-1628, July 2017.
[29] W. Liu, C. Cao, Y. Zhang, J. Wang and D. Yang, "Parameters Optimization of Synchronous Induction Coilgun Based on Ant Colony Algorithm," in IEEE Transactions on Plasma Science, vol. 39, no. 1, pp.
100-104, Jan. 2011.
[30] X. Guan, S. Wang, S. Guan, D. Guo and B. Liu, "Study on the Best Trigger Position of Multistage Induction Coil Launcher," in IEEE Transactions on
Plasma Science, vol. 47, no. 5, pp. 2419-2423, May 2019.