طراحی و ساخت شارژ بدون سیم با استفاده از جبرانساز LCC-S با قابلیت استفاده در وسایل نقلیه زیر سطحی

نصیری, ابوالفضل; ریاحی, سعید; حق مرام, رضا; ملایی, حسین

طراحی و ساخت شارژ بدون سیم با استفاده از جبرانساز LCC-S با قابلیت استفاده در وسایل نقلیه زیر سطحی

نوع مقاله : مقاله پژوهشی

نویسندگان

¹ استادیار، دانشگاه افسری و تربیت پاسداری امام حسین (ع)، تهران، ایران

² دانشجو کارشناسی ارشد دانشگاه جامع امام حسین (ع)، تهران، ایران

³ دانشیار، دانشگاه جامع امام حسین (ع)، تهران ، ایران

⁴ دانشجوی دکتری، دانشگاه جامع امام حسین،تهران،ایران

چکیده

در این پژوهش به بررسی شبکه‌های جبران‌ساز SS و LCC-S در مدار انتقال توان بدون‌سیم پرداخته شده است. رابطه میان ضریب تزویج با قطر پدهای دایره‌ای و یافتن مقدار ضریب تزویج مناسب برای انتقال توان با بیشینه بازده و کمینه تغییر توان با جبران‌سازهای منتخب مورد پژوهش قرار گرفت. فاصله هوایی در انتقال توان، رابطه عکس با ضریب تزویج دارد. پد دایره‌ای نسبت به تغییر ضریب تزویج حساسیت بالایی دارد. فاصله هوایی و عدم همپوشانی کامل دو پد سبب کاهش بازده و توان انتقالی می‌گردد. لذا برای اطمینان‌پذیری از کارایی مدار در مناسب-ترین حالت، شبکه‌های جبران‌ساز متفاوت از نظر تغییرات بازده و توان، تغییرات ولتاژ و جریان خروجی، وابستگی به ضریب تزویج و درجه آزادی برای اعمال محدودیت‌ها مورد بررسی قرار گرفتند. در این تحقیق، به بهبود عملکرد انتقال توان بدون‌سیم با توان kW 3 پرداخته می‌شود. در نتیجه موجب بهبود بازده مبدل و کاهش تغییرات لحظه‌ای جریان و ولتاژ گردید. نتایج با استفاده از نرم‌افزار PSIM، بررسی و مورد تایید قرار گرفته است. برای تایید طراحی و نتایج شبیه‌سازی، یک نمونه W 120 با جبران‌ساز LCC-S شبیه‌سازی و ساخته شد.

کلیدواژه‌ها

20.1001.1.26455153.1404.13.1.6.1

عنوان مقاله [English]

Design and Fabrication of Wireless Charging Using LCC-S Compensator for Use in Subsurface Vehicles

نویسندگان [English]

Abolfazl Nasiri ¹
saeed Riahy ²
Reza Hahmaram ³
Hossein Molaei ⁴

¹ Assistant Professor, Imam Hussein (AS) Guards Officer Training and Training University, Tehran, Iran

² Master's student, Imam Hussein (AS) University, Tehran, Iran

³ Associate Professor, Imam Hossein (AS) University, Tehran, Iran

⁴ PhD student, Imam Hossein University, Tehran, Iran

چکیده [English]

In this study, the SS and LCC-S compensating networks in the wireless power transmission circuit have been investigated. The relationship between coupling coefficient and diameter of circular pads and finding the appropriate coupling coefficient for power transfer with maximum and minimum power change with selected compensators was investigated. The aerial distance in power transmission has an inverse relationship with the coupling coefficient. The circular pad is highly sensitive to changes in the coupling coefficient. The aerial distance and the lack of complete overlap of the two pads reduce the efficiency and transmission power. Therefore, in order to ensure the efficiency of the circuit in the most appropriate case, different compensatory networks were investigated in terms of efficiency and power changes, voltage and output current changes, dependence on coupling coefficient and degree of freedom for imposing limitations. In this study, the performance of wireless power transmission with a power of 3 kW is improved. As a result, it improved the efficiency of the converter and reduced the instantaneous changes in current and voltage. The results have been reviewed and confirmed using PSIM software. To confirm the design and simulation results, a 120 W prototype was simulated and constructed with an LCC-S compensator.

کلیدواژه‌ها [English]

Induction Power Transmission
Wireless Power Transmission
Compensatory Network

مراجع

[1] Z. Yan, Y. Zhang, K. Zhang, B. Song, and C. Mi, “Underwater wireless power transfer system with a curly coil structure for AUVs,” IET Power Electronics, vol. 12, no. 10, pp. 2559–2565, 2019.

[2] H. Wang, U. Pratik, A. Jovicic, N. Hasan, and Z. Pantic, “Dynamic wireless charging of medium power and speed electric vehicles,” IEEE Trans. Veh. Technol., vol. 70, no. 12, pp. 12552–12566, 2021.

[3] Y. Zhang, S. Chen, X. Li, and Y. Tang, “Design of high-power static wireless power transfer via magnetic induction: An overview,” CPSS Transactions on Power Electronics and Applications, vol. 6, no. 4, pp. 281–297, 2021.

[4] S. A. Q. Mohammed and J.-W. Jung, “A comprehensive state-of-the-art review of wired/wireless charging technologies for battery electric vehicles: Classification/common topologies/future research issues,” IEEE Access, vol. 9, pp. 19572–19585, 2021.

[5] A. Nasiri, M. Gangi, and S. M. Alavi, “Performance Improvement of High Voltage Transformer in Klystron Amplifier Power Supply by Magnetizing Current Balancing,” Nashriyyah-i Muhandisi-i Barq va Muhandisi-i Kampyutar-i Iran, vol. 111, no. 2, pp. 150–156, 2024 (In Persian).

[6] G. Palani, U. Sengamalai, P. Vishnuram, and B. Nastasi, “Challenges and Barriers of Wireless Charging Technologies for Electric Vehicles,” Energies (Basel), vol. 16, no. 5, p. 2138, 2023.

[7] X. Yan, L. Wang, Z. Chai, S. Zhao, Z. Liu, and X. Sun, “Electric vehicle battery simulation system for mobile field test of off-board charger,” Energies (Basel), vol. 12, no. 15, p. 3025, 2019.

[8] J. Van Mulders et al., “Wireless power transfer: Systems, circuits, standards, and use cases,” Sensors, vol. 22, no. 15, p. 5573, 2022.

[9] P. K. Chittoor, B. Chokkalingam, and L. Mihet-Popa, “A review on UAV wireless charging: Fundamentals, applications, charging techniques and standards,” IEEE access, vol. 9, pp. 69235–69266, 2021.

[10] A. Nasiri and M. R. Banaei, “A new magnetron driving method using a phase shifted active clamp forward converter for sulfur plasma tube applications’, IET Power Electron., vol. 14, no. 2, pp. 442–453, 2021.

[11] A. Nasiri, M. R. Banaei, S. M. Alavi, and S. Hosseinzadeh, “A New Control Method for Magnetron Lamp Power Supply Using Forward-Flyback Converter With Active Clamp,” IEEE Trans. On Plasma Science., vol. 51, no. 8, pp. 2390-2398, Aug. 2023.

[12] S. Niu, H. Xu, Z. Sun, Z. Y. Shao, and L. Jian, “The state-of-the-arts of wireless electric vehicle charging via magnetic resonance: principles, standards and core technologies,” Renewable and Sustainable Energy Reviews, vol. 114, p. 109302, 2019.

[13] A. I. Mahmood, S. K. Gharghan, M. A. Eldosoky, and A. M. Soliman, “Near‐field wireless power transfer used in biomedical implants: A comprehensive review,” IET Power Electronics, vol. 15, no. 16, pp. 1936–1955, 2022.

[14] J. Shi, D. Li, and C. Yang, “Design and analysis of an underwater inductive coupling power transfer system for autonomous underwater vehicle docking applications,” Journal of Zhejiang University SCIENCE C, vol. 15, no. 1, pp. 51–62, 2014.

[15] H. Liu, L. He and B. Cheng, "A Powerless Fractional-Order WPT System with Extended Zero Voltage Switching Region," in IEEE Transactions on Industrial Electronics, doi: 10.1109/TIE.2024.3447733.

[16] W. Li, W. Mei, Q. Yuan, Y. Song, Z. Dongye, and L. Diao, “Detuned Resonant Capacitors Selection for Improved Misalignment Tolerance of LCC-S Compensated Wireless Power Transfer System,” IEEE Access, vol. 10, pp. 49474–49484, 2022.

[17] M. G. S. Pearce, G. A. Covic, and J. T. Boys, “Robust ferrite-less double D topology for roadway IPT applications,” IEEE Trans Power Electron, vol. 34, no. 7, pp. 6062–6075, 2018.

[18] S.-J. Jeon and D.-W. Seo, “Effect of additional transmitting coils on transfer distance in multiple-transmitter wireless power transfer system,” IEEE Access, vol. 10, pp. 9174–9183, 2022.

[19] A. Zakerian, S. Vaez-Zadeh, and A. Babaki, “A dynamic WPT system with high efficiency and high power factor for electric vehicles,” IEEE Trans Power Electron, vol. 35, no. 7, pp. 6732–6740, 2019.

[20] S. Riahy, R. Haghmaram, and A. Nasiri, “Investigation of Methods of Compensation of Wireless Power Transmission in Semi-Dynamic Mode and Selection of Suitable Air Distance,” Scientific Journal of High Speed Craft Engineering, vol. 22 no. 62, pp. 52-62, 2024 (In Persian).

[21] E. Chaidee, A. Sangswang, S. Naetiladdanon, and S. Nutwong, “An Inverter Topology for MultiTransmitter Wireless Power Transfer Systems,” IEEE Access, vol. 10, pp. 36592–36605, 2022.

[22] X. Liu, T. Wang, F. Gao, M. M. Khan, X. Yang, and D. J. Rogers, “A resonant inductor integrated-transformer-based receiver for wireless power transfer systems,” IEEE Transactions on Industrial Electronics, vol. 70, no. 4, pp. 3616–3626, 2022.

[23] Q. Zhu, L. Wang, Y. Guo, C. Liao, and F. Li, “Applying LCC compensation network to dynamic wireless EV charging system,” IEEE Transactions on Industrial Electronics, vol. 63, no. 10, pp. 6557–6567, 2016.

[24] T. Orekan, P. Zhang, T. Orekan, and P. Zhang, “Study and Analysis of Underwater Wireless Power Transfer,” Underwater Wireless Power Transfer: Smart Ocean Energy Converters, pp. 35–49, 2019.

[25] C. Cai, Y. Zhang, S. Wu, J. Liu, Z. Zhang, and L. Jiang, “A circumferential coupled dipole-coil magnetic coupler for autonomous underwater vehicles wireless charging applications,” IEEE Access, vol. 8, pp. 65432–65442, 2020.

[26] Y. Li et al., “Efficiency analysis and optimization control for input-parallel output-series wireless power transfer systems,” IEEE Trans Power Electron., vol. 35, no. 1, pp. 1074–1085, 2019.

[27] K. Sivagami, J. Channegowda, and P. Damodharan, “Recent Advances in Wireless Power Transfer for Electric Vehicle Charging,” Power Electronics for Green Energy Conversion, pp. 545–572, 2022.

[28] W. V. Wang, D. J. Thrimawithana, and M. Neuburger, “An Si MOSFET-based high-power wireless EV charger with a wide ZVS operating range,” IEEE Trans. Power Electron., vol. 36, no. 10, pp. 11163–11173, 2021.

[29] Y. Guo, Y. Zhang, B. Yan, K. Wang, Z. Zhang, and L. Wang, “Interoperability analysis of compensation network in electric vehicle wireless charging system,” in 2018 IEEE International Power Electronics and Application Conference and Exposition (PEAC), 2018.

[30] M. Hadizade, R. Haghmaram, A. Nasiri, and H. mollaei, “Improved Soft Switching Range (ZVS) in Wireless Charger,” Scientific Journal of High Speed Craft Engineering, vol. 22 no. 62, pp. 24-32, 2024 (In Persian).

[31] N. Z. Saadabad, S. H. Hosseini, A. Nasiri, and M. Sabahi, “New soft‐switched high gain three‐port DC–DC converter with coupled inductors,” IET Power Electronics, vol. 13, no. 19, pp. 4562–4571, 2020.

[32] N. Z. Saadabad, A. Nasiri, and J. Nekoui, “A new three-port DC/DC converter with soft switching, for PV applications,” International Journal of Circuit Theory and Applications, doi.org/10.1002/cta.4107

[33] A. Nasiri, and S. J. Tabatabaei, “Optimal Design of Pedestal Mechanism Servo Electric Motor,” Scientific Journal of High Speed Craft Engineering, vol. 21, no. 61, pp. 45–51, 2023. (In Persian).

[34] J. Hou, Q. Chen, Z. Zhang, S.-C. Wong, and K. T. Chi, “Analysis of output current characteristics for higher order primary compensation in inductive power transfer systems,” IEEE Trans. Power Electron., vol. 33, no. 8, pp. 6807–6821, 2017.

[35] M. R. Banaei, A. Nasiri, S. M. Alavi, and S. Hosseinzadeh, “Voltage Control of Magnetron Power Supply Utilizing Active Clamp Flyback Converter,” Scientific Journal of Applied Electromagnetics, vol. 7, no. 1, pp. 73–82, 2019. (In Persian).

[36] A. Nasiri, M.R. Banaei, S. M. Alavi, and SH. Hosseinzadeh, “A New Driving Method for a Magnetron Tube Using Phase-Shifted HalfBridge Converter,” Journal of Radar, vol. 8, no. 2 , pp. 9–20, 2020. (In Persian).

[37] I.-S. Sorlei et al., “Fuel cell electric vehicles—A brief review of current topologies and energy management strategies,” Energies (Basel), vol. 14, no. 1, p. 252, 2021.